Loading ...
Loading ...
Loading ...
14 EN
6 Listen to radio
Store radio stations
automatically
Note
• You can program a maximum of 20 FM and 10 AM
radio stations.
• WhenenteringFMorAMmodefortherst
time, the product prompts you to search and
store all the available radio stations.
1 Press SOURCE repeatedly to select FM or
AM tuner mode.
» [AUTO INSTALL-PRESS PLAY-STOP
CANCEL] (auto install-press play-stop
cancel)isdisplayed.
2 Press to start full scan.
» [AUTO] is displayed.
» The product stores all the available
radio stations automatically, and then
broadcaststherstavailablestation.
» The station list is memorized in the
product. When you enter the radio
mode next time, the station scan does
not take place.
Note
• If you press , the product will not perform full scan,
and the same message will pop up when you enters FM
or AM mode next time.
• You can also press and hold PROG for two
seconds to activate automatic programming.
» [AUTO](auto)isdisplayed.
» The product stores radio stations with
sufcientsignalstrengthautomatically.
» Therststoredradiostationis
broadcast automatically.
Tune to a radio station
Tip
• Keep the product away from other electronic devices
to avoid radio interference.
• For better reception, fully extend and adjust the
position of the antenna.
1 Press SOURCE repeatedly to select FM or
AM tuner.
2 Press and hold / for two seconds.
» [SEARCH] is displayed.
» The radio tunes to a station with
strong signal automatically .
3 Repeat step 2 to tune to more stations.
• To tune to a station with weak signal,
press / repeatedlyuntilyound
better reception.
Store radio stations manually
Note
• You can program a maximum of 20 FM and 10 AM
radio stations.
1 Tune to a radio station.
2 Press PROG to activate the program mode.
» A position number is displayed.
3 Press / to allocate a number to this
radio station, then press PROGtoconrm.
4 Repeat steps 1 to 3 to program other stations.
Tip
• To overwrite a programmed station, store another
station in its place.
Select a preset radio station
In tuner mode, press / to select a preset
number.
Loading ...
Loading ...
Loading ...