Loading ...
Loading ...
Loading ...
4
FEATURES AND BENEFITS
1. Cover
Just press on. Tightfitting seal
resists leakage.
2. 2-oz. Measured Pour Lid
Allows you to measure and add
ingredients without removing
the cover.
3. 48-oz. Glass Jar with Dripless
Pour Spout
Has a unique, sturdy, widemouth
design and a dripless pour spout
for no-mess pouring.
4. Leak-proof Rubber Gasket
(not shown)
Holds the glass jar snugly in
position for safe operation.
5. High-quality Cutting Assembly
with Patented Stainless
Steel Blades
Is strong enough for all blender
tasks, including tough jobs, from
ice crushing to chopping delicate herbs.
6. Locking Ring
Is self-aligning so that the glass blender jar slides easily into position.
7. Heavy-duty Motor Base
Is so sturdy and stable, it will not “walk” on your counter – even
during ice crushing!
8. 5-Speed Dial with Push-button Controls
a. 5-Speed Dial Control
Choose from 5 speeds that include stir, chop, mix, purée and
liquefy to blend ingredients to the desired consistency.
b. Pulse Button
Set the dial to the desired speed and press the Pulse button.
Pulse at any speed to blend ingredients only as much as needed.
c. Ice Crush Button
Press the ice crush button to begin crushing. This button is preset
to the best speed for crushing ice.
9. Slip-proof Feet
Prevent movement during use and prevent damaging marks
on countertops or tables.
10. Cord Storage (not shown)
Keeps countertop safe and neat by conveniently storing excess
cord.
USE AND CARE
ASSEMBLY
To use your Cuisinart
®
SmartPower Classic
™
Blender, begin by assembling the blender jar.
1. Turn the blender jar (a) upside down, and
place it flat on a sturdy surface.
2. Position the rubber gasket (b) on the round
opening on the bottom of the blender jar.
3. Turn the cutting assembly (c) upside down,
and place the blade end in the blender
jar opening.
Note: Blades are sharp... handle carefully.
4. Secure the rubber gasket and cutting
assembly into position by placing the
smaller opening of the locking ring (d) on top
of the cutting assembly. Engage threads by twisting the locking ring
clockwise until tightened. Make sure locking ring is tightly fastened
to blender jar. Once assembled, turn the blender jar right side up.
5. Push the cover onto the top of the blender jar. Push the measured
pour lid into the cover.
6. Place the blender jar on the motor base so that the jar markings are
facing you and the handle is positioned to one side.
7. Plug in power cord. Your blender is now ready to be used.
Note: Blades are sharp...
handle carefully.
2
1
3
5
6
7
8
8a
8b
8c
9
(d)
(c)
(b)
(a)
Loading ...
Loading ...
Loading ...