Loading ...
Loading ...
Loading ...
Operation
10 - English
Disconnecting a Bluetooth
®
device
• Turn off the Bluetooth
®
feature on your device.
• If your mobile device supports NFC, tap the NFC touchpoint on your mobile
device to the center of the right earcup. Tap again to reconnect.
Reconnecting a previously connected device
When powered on, the headphones will automatically try to reconnect with the two
most recently connected devices. Make sure the device(s) are within range and
powered on.
Scrolling through other paired devices
To play music from a device in the headphone memory that is not currently
connected:
1. Slide all the way up to the symbol and release to hear which device(s)
are currently connected.
2. Within two seconds, slide all the way up to the symbol and release again
to connect to the next paired device.
3. Repeat step 2 until you hear the correct device name.
Note: To use this feature, voice prompts must be on. (See “Turning voice
prompts off/on” on page 8.)
Note: If a device is not within Bluetooth range (33 ft. or 10 m), scroll to the
next device.
Clearing the headphone memory
To clear the headphone memory of all devices:
1. Slide all the way up to the symbol and hold for ten seconds, until you
hear “Bluetooth device list cleared.”
2. Delete Bose AE2 SoundLink from the Bluetooth list on your mobile device.
All Bluetooth devices are cleared and the headphones are ready to pair.
Headphone controls
The headphone controls are located on the side of the right earcup.
• Press once to play/pause or answer/end a call.
• Double press to skip forward.
• Triple press to skip backward.
• Press and hold to ignore an incoming call.
Volume
up
Volume
down
Multi-function
button
Loading ...
Loading ...
Loading ...