Loading ...
Loading ...
Loading ...
Settings
106
Water hardness
Your dishwasher is fitted with a water
softener.
- The dishwasher needs to be
programmed to the correct water
hardness for your area.
- Your local water authority will be able
to advise you of the water hardness
level in your area.
- Where the water hardness fluctuates,
e.g. between 1.8 and 2.7mmol/l (10-
15°dH - German scale), always
programme the dishwasher to the
higher value (2.7mmol/l or 15°dH in
this example).
If the water hardness in your area is
available in a unit other than °dH, you
can convert the values as follows:
1°dH = 0.18mmol/l = 1.78°fH
Setting the water hardness
Select the water hardness level in
your area and confirm with OK.
AutoDos (automatic
dispensing)
If you later wish to change the fill level
or dispensing amount of the PowerDisk,
you can adjust the pre-set values
according to the information on the
packaging.
These settings are important in order for
the PowerDisk almost empty message to
be displayed correctly. These settings
have no influence on the amount of
detergent dispensed in each wash
programme.
Setting thePowerDisk fill level
The PowerDisks currently available
contain 400g of detergent.
Select the PowerDisk fill levelmenu
option and confirm with OK.
Enter the PowerDisk fill quantity and
confirm with OK.
Setting theDosage amount
The PowerDisks currently available
dispense approximately 7g of
detergent per rotation.
Select the Dosage amountmenu
option and confirm with OK.
Select the dispensing quantity of the
PowerDisk and confirm with OK.
Loading ...
Loading ...
Loading ...