Loading ...
Loading ...
Loading ...
EN
10
4 - Installation Instructions
STEP 1
Install the backsplash (if provided) by the three screws on the
back and the toe kick
3”9”
STEP 2
Slide the rangetop top into place.
STEP 3
Two clamp brackets are provided with your unit.
After rangetop has been installed into the countertop, install the
brackets on the burner box as shown.
step A place the clamping screws into brackets
step B attach brackets by using the attachment screws on the
selected location of burner box, tighten screws just
enough to hold brackets in place
step C position brackets so that they are with the clamp screw
in contact with the counter top bottom
step D tighten attachment screws securely.
step E check that the front edge of the rangetop is parallel
to the front edge of the countertop tighten the screw
clamping against the countertop.
DO NOT OVER TIGHTEN
Loading ...
Loading ...
Loading ...