User Manual - Page 7

For JC95W. Also, The document are for others Schmick models: JC95B,  JC132B,  JC132W

Loading ...
Loading ...
Loading ...
7
MOVING THE DRINKS FRIDGE
Remove all items.
Securely tape down all loose items (shelves) inside your appliance.
Turn the adjustable leg up to the base to avoid damage.
Tape the door shut.
Be sure the appliance stays secure in the upright position during transportation. Also protect
outside of appliance with a blanket, or similar item.
ENERGY SAVING TIPS
The appliance should be located away from heat producing appliances, and away from direct
sunlight.
Ensure that the unit is adequately ventilated. Never cover air vents at front.
Only open the door when necessary. Avoid leaving the door open for long periods or
opening/closing the door frequently.
For beer units, when you are away, set at 8-10°C, this means much less energy consumption
and still will keep beverages from spoiling
Keep unit at least ¾ full, this will ensure less run times, as less air to chill
Every 12months or so check your rear wire condenser (behind panel) for dust and particle build
up, this can cause over running and overheating if blocked. Clean with brush or vacuum up the
build-up of dust/particles.
TROUBLESHOOTING
If you feel the appliance is out of order, follow these instructions to try to see if you can solve the
problem simply by yourself before calling for service.
PROBLEM POSSIBLE CAUSE / MEASURE
The Drinks Fridge does not operate.
Not plugged in.
The appliance is turned off.
The circuit breaker tripped or a blown fuse.
The Drinks Fridge is not cold enough.
Check the temperature control setting.
External environment may require a higher setting.
The door is opened too frequently.
The door is not closed completely.
The door gasket does not seal properly.
Automatically turn-on and turn-off
frequently.
The room temperature is hotter than normal.
A large amount of contents has been added to the
Wine Cooler.
The door is opened too frequently. The door is not
closed completely.
The temperature control is not set correctly. The
door gasket does not seal properly.
The lighting does not work.
Not plugged in.
The circuit breaker tripped or a blown fuse. The
lighting is turned off.
Too much vibration
Check to assure that the appliance is level.
Check to assure no parts inside the cabinet or in the
compressor chamber are loose.
Loading ...