Loading ...
Loading ...
Loading ...
Engine Oil u Changing Engine Oil & Filter
60
Maintenance
6.
Remove the oil filter with a filter wrench
and let the remaining oil drain out. Make
sure the prior seal is not stuck to the
engine.
u Discard the oil and oil filter at an
approved recycling center.
7.
Apply a thin coat of engine oil to the
rubber seal of a new oil filter.
8.
Install a new oil filter and tighten.
9.
Install the new sealing washers onto the
drain bolts. Tighten the drain bolts.
10.
Fill the crankcase with the recommended
oil (2 P. 42) and install the oil fill cap/
dipstick.
11.
Check the oil level. 2 P. 57
12.
Check that there are no oil leaks.
Rubber
seal
Filter
Torque: 19 lbf·ft (26 N·m, 2.7 kgf·m).
Torque: 22 lbf·ft (30 N·m, 3.1 kgf·m).
Required oil
When changing oil & engine oil
filter:
3.9 US qt (3.7 liters)
When changing oil only:
3.7 US qt (3.5 liters)
Loading ...
Loading ...
Loading ...