Loading ...
Loading ...
Loading ...
19
Satellite receiver, decoder,CDV, games, etc.
Carry out the connections shown opposite.
To optimise picture quality, connect the equipment which
produces the RGB signals (digital decoder, games, etc.) to
EXT1, and the equipment which produces the
S-VHS signals (S-VHS and Hi-8 video recorders, certain
DVD drives) to EXT2 and all other equipment to either
EXT1 or EXT2.
To select connected equipment
Press the AV key to select EXT1, EXT2/S-VHS2 (S-
VHS signals from the EXT2 socket).
Make the connections as shown opposite.
With the AV key, select AV/S-VHS3.
For a mono set, connect the sound signal to the AUDIO L (or
AUDIO R) input.The sound automatically comes out of the left
and right speakers of the set.
Headphones
When headphones are connected, the sound on the TV
set will be cut.The VOLUME -/+ keys are used to adjust
the volume level. The headphone impedance must be
between 32 and 600 Ohms.
To connect to a hi-fi system, use an audio connection
cable and connect the television’s “SPDIF” output to a
“DIGITAL IN” input on the amplifier (amplifier with
coaxial digital input).
Note : If you select AC3 sound, you must have your TV conected
to a Home Theatre System or amplifier. In this mode, no sound
will be heard from the TV speakers directly.
A common interface is available to connect a CAM
(conditional access module) and a smartcard. Please
contact your service provider to get more information
about these modules.
Note : the television should always be switched off before any
module is inserted in the common interface slot.
Connecting peripheral equipment
Amplifier connection
Common interface
Side connections
Other equipment
EXT 1
SPDIF
CI (Common interface)
Loading ...
Loading ...
Loading ...