English
Spanish
Installing Instructions
Wall mount bracket (not included) installing
instructions
Stand Installing Instructions
4
Do not mix the two installation types.
NOTE
After installing, move the television to designated spot.
RSAG8.805.9123
Do not touch the screen, use
the back handle to operate
ATTENTION
Follow the illustrations and textual instructions.
Two people or more are required.
Do not pinch the screen.
Do not touch the screen when you take out, move, support the television.
Carefully remove protective film after installing TV.
1
Buckles
Buckles
Stands
Upper cushion
2
BACK
Upper cushions
Big handles
Upper cushions
B-type: L2R2
R2
L2
A-type: L1R1
Cable clamp
Screws
Stand
R1
L1
1
Open the box.
Remove buckles on the upper box.
1
2
Take out stands, upper cushions and the upper box.
3
Place cushions up side down, make sure grooves face-up and in line. The distance
between the two cushions should be less than that of the base holes.
Grooves face-up
3
2
Two people stand on each side of the television, grasp big handles with one hand and hold
its bottom with another hand. Lift and move the television vertically to the grooves in upper
cushions.
1. Keep the television vertically on the
grooves of upper cushions. Remove
the two handles.
3
Two installation types can be selected according to your needs: A-type(L1R1) span
and B-type(L2R2) span.
1
Take out cable clamps from stands.
Fix stands to the television with screws.
Restore cable clamps to stands.
2
3
One person holds the television from the front side, the other person takes out 4 screws
(M5×16) to install stands as following steps:
3. Mount the television to the wall. Please
follow the illustrations below when you lift up
the TV.
2. Set up the wall mount bracket. Please
follow its instructions.
Incorrect operation may cause property damage or personal injury.
CAUTION