Loading ...
Loading ...
Loading ...
8
ENGLISH
Connection to an external control device
q w re
q Flasher input connector (FLASHER IN)
Used when connecting a control box or other
control device to this unit, and using such a
device to control this unit.
wDC control output connector
(DC CONTROL OUT)
Used when connecting a device that has a DC
control input terminal to this unit, and linking
the power ON/STANDBY function of this device
with the power ON/STANDBY of the connected
device.
An electrical signal of max 12 V/44 mA is output
from the DC control output terminal.
For details, see the instruction manual of the
connected device.
NOTE
•Do not use the DC control output terminal as
the power supply for an external device.
•When using this unit with a device connected
to the DC control connector, set the auto
standby function to “Off” (vpage 9
“Setting the power to standby automatically
(Auto standby function)”).
eDC control input connector
(DC CONTROL IN)
Used when connecting a unit that has a DC
control input terminal to this device, and linking
the power ON/STANDBY of the connected
device with the power ON/STANDBY of this
unit.
For details, see the instruction manual of the
connected device.
NOTE
•When a 5 V – 15 V voltage is input to the DC
control input terminal, the power of this unit
switches ON.
However, inputting voltage outside of this
range will cause damage to this unit.
•When using this unit with a device connected
to the DC control connector, set the auto
standby function to “Off” (vpage 9
“Setting the power to standby automatically
(Auto standby function)”).
rRemote control connector
Used when connecting an external control
device to this unit, and using the device to
control this unit.
NOTE
When connecting a marantz AV8801 or AV7701
AV pre-tuner, you can switch the power of this
unit to ON/STANDBY together with the AV8801/
AV7701 power supply.
For details, see the AV8801 or AV7701 owner’s
manual.
1.MM8077U_ENG_最終検図待ち_0926.indd 8 2012/10/15 13:15:26
Loading ...
Loading ...
Loading ...