Loading ...
Loading ...
Loading ...
Tire Puncture u Removing Wheels
97
continued
Troubleshooting
10.
Install the left brake caliper and tighten
the mounting bolts.
u Take care to prevent the brake caliper
from scratching the wheel during
installation.
u Use new mounting bolts when
installing the brake caliper.
11.
Lower the front wheel on the ground.
12.
Apply the brake lever and pump the fork
several times.
13.
Retighten the left axle pinch bolt.
14.
Raise the front wheel off the ground
again, and check that the wheel rotates
freely after you release the brake.
15.
Install the wheel speed sensor and
tighten the bolts, then check the
clearance between the wheel speed
sensor and the pulser ring.
16.
Remove the protective tape or cloth.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
Torque: 22 lbf·ft (30 N·m, 3.1 kgf·m).
Torque: 33 lbf·ft (45 N·m, 4.6 kgf·m).
NOTICE
When installing the brake calipers into position on
the fork legs, carefully fit the brake disc between the
pads to avoid scratching them.
CB1000R ABS
CB1000R
Torque: 16 lbf·ft (22 N·m, 2.2 kgf·m).
CB1000R ABS
Loading ...
Loading ...
Loading ...