Loading ...
Loading ...
Loading ...
Reconnecting your device:
When your Bluetooth audio receiver is not paired to a device, the LED indicator slowly
blinks on and o.
V2 ENGLISH 19-0557
TROUBLESHOOTING
LEGAL NOTICES
FCC caution:
Changes or modications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
FCC statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
Your receiver loses the
Bluetooth connection if
you...
Turn o your receiver.
Move the Bluetooth
device out of range.
Turn o your Bluetooth
device.
Turn o Bluetooth on
your Bluetooth device.
Connect your Bluetooth
device to another
Bluetooth device.
To reconnect…
Turn on your Bluetooth audio receiver. Your Bluetooth
audio receiver searches for the last connected Bluetooth
device and reconnects.
Make sure that your Bluetooth device is within 33 feet
(L.O.S.) of your Bluetooth audio receiver.
Turn on your Bluetooth device, then make sure that
Bluetooth is on.
Turn on Bluetooth on your Bluetooth device.
Disconnect your Bluetooth device from the other
Bluetooth device, then set your device to pairing mode.
Select RF-BTR319 on your Bluetooth device.
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
RSS-Gen & RSS-210 statement:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
RSS-102 statement:
This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled
environment.
Cet équipement est conforme à l'exposition aux rayonnements Industry Canada limites établies pour un
environnement non contrôlé
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries.
aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other
countries.
ONE-YEAR LIMITED WARRANTY
Visit www.rocketshproducts.com for details.
CONTACT ROCKETFISH:
For customer service call 1-800-620-2790
www.rocketshproducts.com
ROCKETFISH is a trademark of Best Buy and its aliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2019 Best Buy. All rights reserved.
PROBLEM:
No power
No sound or low
volume
Cannot establish a
Bluetooth connection
SOLUTION:
• Make sure that your Bluetooth audio receiver power cord is
connected to your Bluetooth audio receiver and a power outlet.
• Make sure your Bluetooth audio receiver is turned on.
• Make sure that your Bluetooth device is turned on, Bluetooth is
turned on, and RF-BTR319 is selected.
• Turn up the volume on your audio device connected to your
Bluetooth audio receiver.
• Turn up the volume on your Bluetooth device.
• Make sure that your Bluetooth device is not muted.
• Make sure that the cable connections are secure.
• Shorten the distance between your Bluetooth audio receiver
and your Bluetooth device.
• Make sure that your Bluetooth audio receiver is not paired to
another Bluetooth device.
• Make sure that your Bluetooth device is not paired to another
Bluetooth device.
• Shorten the distance between your Bluetooth audio receiver
and your Bluetooth device.
• Turn your devices o, then on. Re-pair your Bluetooth audio
receiver and your Bluetooth device.
• Make sure that your Bluetooth audio receiver is not paired to
another Bluetooth device.
• Make sure that your Bluetooth audio receiver and Bluetooth
device are both in pairing mode.
• Make sure that your Bluetooth device is not connected to any
other device.
• Make sure that you have selected RF-BTR319 on your
Bluetooth device.
PROBLEM:
My Bluetooth device
keeps unpairing
My Bluetooth Music
Receiver does not
appear on my
Bluetooth device
NFC paring does not
work
SOLUTION:
• Shorten the distance between your Bluetooth audio receiver and
your Bluetooth device.
• If the battery on your Bluetooth device is low, recharge the battery.
• Shorten the distance between your Bluetooth audio receiver and
your Bluetooth device.
• Put your Bluetooth audio receiver into pairing mode, then refresh
your list of Bluetooth devices. For more information, see the
documentation that came with your Bluetooth device.
• Make sure that your device has the NFC feature. See the device’s
documentation for instructions.
• Make sure that your Bluetooth device is turned on and Bluetooth
is turned on.
• Make sure that your NFC device supports Bluetooth pairing with
NFC.
• Make sure that your Bluetooth device is turned on and the NFC
function is turned on.
• When connecting, touch your Bluetooth device to the NFC logo
( ) on the top of your Bluetooth audio receiver. When
connected, your Bluetooth device may make a sound to indicate
that it is paired.
Loading ...
Loading ...
Loading ...