Loading ...
Loading ...
Loading ...
1
Make sure that the Bluetooth
®
device has the NFC function turned on and
that the screen is active and unlocked.
2
Place the Bluetooth
®
device over your headset so that the NFC detection area
of each device touches the other.
3
Follow the pairing instructions that appear on the Bluetooth
®
device. If a
passcode is required, enter "0000".
The device used in this illustration is for illustration purposes only and may not accurately
depict the actual device used.
You can pair your headset with a compatible device using NFC even when the headset is
turned o.
Adjusting the volume
To change the call volume
• During a call, press the Volume key.
You hear a slightly longer, higher-pitched beep when the volume reaches the maximum
level. After the volume reaches the maximum level, the volume goes down if you keep
pressing the Volume key.
Wearing instruction
You can wear the headset with or without the ear hook, and on either the left or
right ear.
Using your headset
Call handling
To answer a call with the headset
• When you hear an incoming call signal, press the Call key.
To end a call
• During an ongoing call, press the Call key.
To reject a call
• When you hear an incoming call signal, press and hold down the Call key.
To mute the microphone during a call
• Press and hold down the Volume key.
When the microphone is muted, press and hold down the Volume key again to activate the
microphone.
To answer a second call
• When you hear an incoming call signal during an ongoing call, press the Call
key. The ongoing call is put on hold.
To reject a second call
• When you hear an incoming call signal during an ongoing call, press and
hold down the Call key.
To switch between two calls
• Press and hold down the Call key.
5
This is an internet version of this publication. © Print only for private use.
Loading ...
Loading ...
Loading ...