Smeg FAB50RBL5 Refrigerator

User Manual - Page 14

For FAB50RBL5.

PDF File Manual, 16 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
INSTALLATION - 33914779612/A
e
shunts as these could cause overheating
and a risk of burns.
The plug must always be accessible when
the appliance is installed.
Leave the appliance standing vertically for
at least two hours before turning it on for the
first time.
If it is necessary to replace the power cable,
this must be performed by an authorised
technician from Technical Support Service.
Positioning
Choice of location
Always install the appliance in a dry place with
satisfactory ventilation. Depending on its climate
class (stated on the nameplate inside the
refrigerator compartment), the appliance can
be used in different temperature conditions.
Install the appliance at least 3 cm away
from electrical or gas cookers and at least
30 cm away from combustion heaters or
radiators.
The appliance must not be installed near
heat sources. If this is not possible, suitable
insulation must be used.
If installed underneath wall units, at least 5
cm clearance must be left.
Ensure that the appliance is located with
sufficient space for the door to open and for
the internal drawers and shelves to be
removed, if necessary.
Positioning
Position the appliance on a firm, level surface.
The appliance has two small wheels on the
back to allow it to be moved and positioned
more easily.
In any case, we recommend moving the
appliance very carefully in order to avoid
damaging the floor (especially in the case of
wooden floors).
If the floor is not perfectly level, use the two
adjustable feet on the front part of the
appliance.
Level the appliance horizontally adjusting its
feet.
See General safety instructions.
Class Room temperature
SN (Subnormal) + 10°C to + 32°C
N (Normal) + 16°C to + 32°C
ST (Subtropical) + 18°C to + 38°C
T (Tropical) + 18°C to + 43°C
Lean the appliance slightly towards the
rear part to facilitate proper door
closure.
In order for the freezer to be installed
correctly, the door must be able to
close properly. Ensure that the door
seals close hermetically, especially at
the corners.
Loading ...
Loading ...