Loading ...
Loading ...
Loading ...
106
[IP10410(ALL)06/95]
Temperature Selection
[IP10420(ALL)06/95]
The N TEMP M button on the left side of the control panel is
for temperature selection. The N side lowers the set
temperature, and the M side raises the set temperature. Press
and hold either side of the button to rapidly change the
temperature setting in one degree increments to either 65˚F
(18˚C) or 85˚F (29˚C). Then, the set temperature jumps 5˚F and
stops at either 60˚F (16˚C), which is maximum cooling, or 90˚F
(32˚C), which is maximum heating.
[IP10423(ALL)05/96]
Changing the Display Mode (English/Metric)
[IP10425(ALL)05/96]
To switch between the English and Metric display mode, press
the DEFROST and A/C buttons simultaneously while rotating
the fan speed dial upward until it stops moving. After one
second, the display will begin to toggle between English and
Metric.
[IP10430(ALL)06/95]
Fan Speed and Thumbwheel
[IP10440(ALL)06/95]
The ATC automatically adjusts the fan speed to the existing
conditions. To control the fan speed yourself, use the
thumbwheel located at the extreme right side of the ATC
control panel. Using the thumbwheel cancels the automatic fan
speed control, and causes a
H
to appear in the display window.
Rotate the thumbwheel up for HI speeds and down for LO
speeds.
[IP10450(ALL)06/95]
To return to auto fan control, press the AUTOMATIC button.
[IP10460(ALL)06/95]
Airflow Function Selector Buttons
[IP10470(ALL)06/95]
Your ATC has five buttons which allow you to make special
selections for airflow. The buttons are grouped in the middle of
the ATC panel and allow you to determine airflow location.
Pressing any of the function selector buttons illuminates the
button pushed and directs airflow to the appropriate location.
The temperature of the airflow will still be automatically
controlled. Return to fully automatic operation by pushing the
AUTOMATIC button.
File:06vxipn.ex
Update:Mon Jun 3 14:33:05 1996
Loading ...
Loading ...
Loading ...