Loading ...
Loading ...
Loading ...
22
GB
Dual Sound
Sets the sound from the speaker to [Mono],
[Stereo], [A] or [B].
Note
• If the signal is very weak, the sound becomes
monaural automatically.
• If the stereo sound is noisy when receiving a
NICAM programme, select [Mono]. The sound
becomes monaural, but the noise is reduced.
• The [Dual Sound] setting is memorized for each
programme position.
• You cannot listen to stereo broadcast sound
when [Mono] is selected.
Hint
• If you select other equipment connected to the
TV, set [Dual Sound] to [Stereo], [A] or [B].
Advanced Settings
Dynamic Range: Compensates for
differences in the audio level between
different channels.
Note
• The effect may not function or may vary
depending on the programme regardless of the
[Dynamic Range] setting.
Dolby Digital Plus Out: Select [Auto] to
pass through Dolby Digital Plus
stream to ARC when Dolby Digital
Plus is available through connected
Audio System.
During Dolby Digital Plus stream is
output, Digital Audio Out (optical) is
muted.
Select [Off] to convert Dolby Digital
Plus stream to Dolby Digital for both
ARC (Audio system) and Digital Audio
Out (optical).
HE-AAC Audio Level: Adjust the HE-AAC
audio sound level.
MPEG Audio Level: Adjusts the MPEG
audio sound level.
Screen Format
For details about Screen Format, see page
14.
Auto Format
Automatically changes [Screen Format] to
match the input signal.
4:3 Default
Sets the default [Screen Format] for a 4:3
input signal.
Auto Display Area
Automatically adjusts the picture to the
most appropriate display area.
Display Area
Adjusts the picture display area.
Horizontal Shift
Adjusts the horizontal position of the
picture.
Vertical Shift
Adjusts the vertical position of the picture.
Vertical Size
Adjusts the vertical size of the picture
when [Screen Format] is set to [Wide
Zoom].
PC / DCI 4K Settings
Select [Wide Mode], see page 14.
Analogue Set-up
Analogue Auto Tuning: Tunes in all the
available analogue channels. Usually
you do not need to do this operation
because the channels are already
tuned when the TV was first installed.
However, this option allows you to
repeat the process (e.g., to retune the
TV after moving house, or to search
for new channels that have been
launched by broadcasters).
Manual Programme Preset: Before
selecting [TV System]/[Channel]/
[AFT]/[Audio Filter]/[Skip]/[Colour
System], press PROG +/– to select the
programme number with the channel.
You cannot select a programme
number that is set to [Skip].
Programme
Presets programme channels manually.
Screen
Channel Set-up
Loading ...
Loading ...
Loading ...