Loading ...
Loading ...
Loading ...
5
C
L
Cabinet Width 76.2 cm (30”)
Recommended
Cutout Location
from Floor 82.6 cm (32 1/2”)
Cutout Depth 59.7 cm
(23 1/2”) Min.
Cutout Width 72.4 cm
(28 1/2”) Min.
72.7 cm
(28 5/8”) Max.
Cutout Height 69.2 cm
(27 1/4”) Min.
69.4 cm
(27 5/16”) Max.
If the cabinet does not have a solid bottom, two
braces or runners must be installed level with
the bottom of the cutout to support the weight
of the oven. For single ovens, the runners and
braces must support 68 kg (150 lbs.).
Installation Instructions
Suitable
Bracing
to Support
Runners
5 cm x 10 cm
(2” x 4”) or
equivalent
runners level
with bottom
of cutout
54.9 cm
(21 5/8”)
Over Centerline
of Cabinet
NOTE: If marks, blemishes or the cutout
opening are visible above the installed
oven, it may be necessary to add wood
shims under the runners and front trim
until the marks or opening are covered.
NOTE: If the cabinet does not have
a front frame and the sides are less
than 1.9 cm (3/4”) thick, shim both
sides equally to establish the
cutout width.
These ovens are not approved
for stackable installation.
A
Cutout for 30” (76.2 cm) Single Built-In
Ovens only
For JCT3000, JCT5000, PCT7050 models only.
Recommended
cutout location
IURPÀRRU
82.6 cm (32 1/2”)
Cutout
Height
69.2 cm
(27 1/4”) Min.
69.4 cm
(27 5/16”) Max.
Cutout Width
72.4 cm
(28 1/2”) Min.
72.7 cm
(28 5/8”) Max.
Opening
between
inside walls
must be at
least 72.4 cm
(28 1/2”) wide
Allow 1.75 cm
(11/16”)
for overlap
of oven over
side edges of
cutout
Junction box
recommended to
be in right side
adjacent cabinet
Allow a minimum
of 58.42 cm (23”)
for clearance to
adjacent corners,
drawers, walls, etc.
when door is open
58.42 cm
(23”)
Cabinet
Width
76.2 cm (30”)
Allow 2.5 cm (1”) for
overlap of oven top
and 3.2 cm (1
1
ø
4
”)
bottom of cutout
Cutout –
observe all
dimensions and
requirements.
Cutout –
observe all
dimensions and
requirements.
6” (15.24 cm) Min.
34.5” (87.6 cm)
30” models
Center Line Center Line
Side-by-Side Installations
Install two ovens in separate cutouts.
Loading ...
Loading ...
Loading ...