Loading ...
Loading ...
Loading ...
Before using this appliance, it must either be wall mounted or have the feet fitted.
This appliance has been supplied with ‘1 way screws’ for permanent installation of the
feet. This is a safety requirement for the New Zealand and Australian market.
Assembly Instructions
FREE STANDING
1. Ensure the appliance is unplugged and power switches are off.
2. Insert the matching feet brackets into the matching feet until they click into place –
some force may be required.
3. Carefully turn the main body upside-down on a scratch-free and stable surface. Be
careful to prevent damage to the cosmetic finish or your floor surfacing.
4. Align the screw hole on the Heater Feet Bracket with the screw hole on the base of
the appliance.
5. Attach Heater Feet Bracket with the ‘1 way screws’ provided and ensure the bracket
sits firmly in place (do not over tighten).
6. Set appliance upright.
NOTE: The wall bracket edges may be sharp. It is recommended that if using as a free
standing appliance please remove the wall bracket from the back of the heater.
STEP 2
STEP 4
Loading ...
Loading ...
Loading ...