Loading ...
Loading ...
Loading ...
more easily, it is recommended that you use a tripod.
The longer the exposure time, the more noise will be visible on the image.
After shooting, noise reduction will be done for the same amount of time that
the shutter was open. However, you cannot shoot any more while noise
reduction is in progress.
You cannot set the shutter speed to [BULB] in the following situations:
When the [Smile Shutter] function is activated.
When the [Auto HDR] function is activated.
When [Picture Effect] is set to [HDR Painting] or [Rich-tone Mono.].
When the [Multi Frame NR] function is activated.
When the [Drive Mode] function is set to the following modes:
[Cont. Shooting]
[Self-timer(Cont)]
[Cont. Bracket]
When [ Shutter Type] is set to [Electronic Shut.].
If you use the above functions when the shutter speed is set to [BULB], the
shutter speed is temporarily set to 30 seconds.
Hint
Images shot in [BULB] mode tend to be blurry. We recommend that you use a
tripod or a remote commander (sold separately) that has a shutter button lock
function.
[37] How to Use Shooting Selecting a shooting mode
Memory recall
Allows you to shoot an image after recalling often-used modes or camera settings
registered in advance.
1. Set the mode dial to MR (Memory recall).
2. Press the left/right side of the control wheel or turn the control wheel to select
the desired number, then press on the center.
You can also recall registered modes or settings by selecting MENU →
(Camera Settings) → [Memory recall].
Loading ...
Loading ...
Loading ...