Loading ...
Loading ...
Loading ...
CLEANING YOUR DRYER
Cleaning your dryer
Before you start cleaning your dryer, ensure that it is disconnected from the power
(ie unplug the dryer from the power socket).
Cleaning the control panel and outer surfaces of the dryer
Use a soft damp cloth to wipe all surfaces, then wipe dry. Avoid using chemical or
scouring cleaners, as these will damage the paint and plastic surfaces of your dryer.
Cleaning the inside of your dryer
It is important that you occasionally clean the inside of your dryer. If the drum has
any residual dirt or lint stuck to it, remove this and wipe it clean with a damp cloth.
Do not leave any metal objects in the drum, as these may cause rust.
Cleaning the lint filter
■ Lint is generally formed during wearing and washing. Fibres (ie lint) released from
clothes during the drying cycle are collected in the lint filter.
■ It is important to clean the lint filter after every load, as the lint produced in the
drying process can become a fire hazard if it is allowed to accumulate in or around
your dryer.
■ The lint filter is located in the door opening (at the bottom).
■ Lint becomes a fire hazard if left to build up, and will reduce the efficiency of your
dryer.
To clean the filter:
1 Open the dryer door.
2 Remove the lint filter by pulling it up and out of the
filter slot.
3 Open it out and wipe the surface clean with your hand.
4 Close the lint filter and place it back in the opening.
Ensure the filter is fitted correctly back in place before
operating the dryer.
IMPORTANT!
If the lint filter becomes damaged, contact your Haier Repairer to arrange for
a replacement filter. Do not operate your dryer with a damaged lint filter or
without the filter in place, as this will cause damage to your dryer.
Lint filter
15
Loading ...
Loading ...
Loading ...