Loading ...
Loading ...
Loading ...
4
FUNCTION BUTTON :
A) TOGGLE SUB ON/OFF: When the PULSE SUB+ is network-paired to another Player, pressing the Function Button
once will toggle the Player’s Subwoofer ON/OFF switch in the BluOS App. With the switch set to ON, a crossover is
engaged: the SUB+ will handle the low frequency while the paired Player will handle the higher frequency content, as
dictated by the crossover level. With the switch set to OFF, the crossover is disengaged and the paired Player handles
the full frequency range. The SUB+ will be silent in this case. Note that using this toggle does not unpair the SUB+
from a Player. Further, this function does not work when multiple SUB+ are paired to a Player.
B) STANDBY: Press and hold the Function button for 5 seconds to place the SUB+ into Vacation Mode (0.5W
Standby). In Vacation Mode, all network activity will cease and the subwoofer will not appear in the BluOS App. Press
the Function button again to restore the SUB+ to Ready Mode.
C) UPGRADE MODE: To manually place the SUB+ into Upgrade Mode, first disconnect it from electrical power. Wait a
moment, then reconnect power. Press and hold the Function button until the LED turns Green and then back to RED,
then release. The LED will immediately turn Green and then back to Red. The SUB+ is now in Upgrade Mode. This is
only necessary in specific cases with authorization from a Bluesound support representative.
D) FACTORY RESET – more information on Factory Reset is available on page 9 of this manual.
MOUNTING FOOT : The PULSE SUB+ can be placed in several orientations, including (but not limited to) laying flat
on its back or mounted to the wall. The back panel Mounting Foot (x4) provides the necessary cushion to help prevent
unwanted vibrations when the SUB+ is laying on its back. The Mounting Foot is also the attachment point for wall
mounting; the shaped groove in the Mounting Foot slides onto the rubber foot on the supplied wall mount bracket and
uses gravity to lock into place.
LOW/LINE LEVEL INPUT : For connecting the PULSE SUB+ via wire to another Bluesound Player that has a wired
SUB OUT, or alternatively to a separate component preamplifier, integrated amplifier, or receiver, at line level.
SERVICE : Use the Service port in conjunction with USB (Type B Mini) to load firmware on the PULSE SUB+. This
is not for consumer use. Only Authorized Bluesound Service personnel can access this USB port and Service control
button.
AC MAINS INPUT : Select the AC power cord appropriate for your region (included). Before connecting the plug to the
wall outlet, firmly connect the other end of the AC power cord to the PULSE SUB+ AC Mains input socket. Never force
the plug into a wall outlet. An adaptor may be necessary in certain regions. Always disconnect the plug from the wall
outlet first, before disconnecting the cable from the SUB+ AC Mains input socket.
USB (TYPE B) : Use the Service port in conjunction with USB (Type B Mini) to load firmware on the PULSE SUB+.
This is not for consumer use. Only Authorized Bluesound Service personnel can access this USB port and Service
control button.
USB (TYPE A) : Use the USB (Type A) port for manual software upgrades. This is only necessary in specific cases with
authorization from the Bluesound Support Crew.
LAN PORT : The LAN port connection is used with an Ethernet cable (not provided) for network connection and
control. This is an optional connection since the PULSE SUB+ can be connected to the network through Wi-Fi. If you
are using wired Ethernet for network, connect one end of the Ethernet cable to the SUB+ LAN port, and the other end
directly to your router or switch.
MAGNETIC RUBBER FEET : When the PULSE SUB+ is placed in a standing position, use the supplied magnetic
rubber feet (x2) to help prevent unwanted vibrations. The magnets are mounted inside the cabinet of the SUB+. Simply
place the magnetic rubber feet near the required location and they will snap into place.
3
4
5
7
6
8
9
10
11
Loading ...
Loading ...
Loading ...