Loading ...
Loading ...
Loading ...
English
45
Sound and Volume Controls
Setting the speaker’s
channels
You can adjust the delay times (center
and rear only) and volume level for
individual speakers. These adjustments let
you optimises the sound according to
your surroundings and setup.
IMPORTANT!
The speaker settings only available
on Multi-channel audio outputs.
A Press SETUP.
B Press X repeatedly to select { Audio
Setup Page }.
C Press S T to highlight { Speaker
Setup }, then press X.
Analog Output
Digital Audio Setup
Sound Mode
Speaker Setup
CD Upsampling
Night Mode
Audio Setup Page
Front Speakers Large
Center Speaker Small
Rear Speakers
Speakers Volume
Speakers Delay
Speaker Setup Page
Subwoofer
D Enter its submenu by pressing X.
E Press S T to highlight one of the
options below at a time, then press X.
{Front Speakers, Center Speaker, Rear
Speakers}
Off – when no speaker is connected.
Large – when connected speakers can
produce low frequency signals below
120Hz.
Small – when connected speakers cannot
produce low frequency signals below
120Hz.
{Subwoofer}
On – when a subwoofer is connected.
Off –when no subwoofer is connected.
{Speakers Volume}
Volume Level setting for individual
speakers (-6dB ~ +6dB).
Front Left +6dB
Front Right +6dB
Center +6dB
Subwoofer 0dB
Rear Right +6dB
Rear Left +6dB
Speaker Setup Page
{Speakers Delay}
Delay times setting in relation to the
listening position or distance for center
and rear speakers (1m ~ 10m).
Center 1.0M
Subwoofer 1.0M
Rear Left 1.0M
Rear Right 1.0M
Speaker Setup Page
F Press W X to adjust the setting that best
suit your surround sound needs.
G Press OK to con rm.
Tip:
– Use the longer delay time settings when
the rear speakers are closer to the listener
than the front speakers.
01-51_dvp5166K_98_eng2.indd 4501-51_dvp5166K_98_eng2.indd 45 2007-04-02 10:37:21 AM2007-04-02 10:37:21 AM
Loading ...
Loading ...
Loading ...