Loading ...
Loading ...
Loading ...
sharkclean.comsharkclean.com
If you run over a hard or sharp object or notice a noise change while vacuuming, check for blockages or
objects caught in the brushroll.
Checking for Blockages in the Hand vacuum:
1. Turn o the vacuum.
2. Remove the hand vacuum from the wand.
3. Check all intake openings to the dust cup and
remove any debris or blockages.
Checking for Blockages in the Wand:
1. Turn o the vacuum.
2. Detach the hand vacuum and floor nozzle from
the wand.
3. Check both ends of the wand for blockages and
debris.
4. Clear away any debris or blockages.
Checking for Blockages in the Floor Nozzle:
1. Turn o the vacuum.
2. Detach the wand.
3. Using a coin, turn the 3 locks on the bottom of
the nozzle counterclockwise to open.
4. Lift o the nozzle cover and tilt back the neck of
the nozzle.
5. Check the opening and remove any debris.
6. Replace the cover by sliding the tabs into the
slots. Press down firmly on all sides. Turn the
locks clockwise to close.
CHECKING FOR BLOCKAGES
MAINTAINING YOUR VACUUM
MAINTAINING YOUR VACUUM
4. Clear any blockages and remove any debris
from the brushroll and floor nozzle.
5. With the cover removed, wipe the brushroll
clean with a dry towel.
6. Replace the cover by sliding the tabs into the
slots. Press down firmly on all sides. Turn locks
clockwise to close, until they click into place.
NOZZLE MAINTENANCE
POWERFIN FLOOR NOZZLE
1. Turn o the vacuum.
2. Press the nozzle release button to detach the
nozzle from the wand.
3. Using a coin, turn the 3 locks counterclockwise
to open, then lift o the cover and tilt back the
neck of the nozzle.
Loading ...
Loading ...
Loading ...