Loading ...
Loading ...
Loading ...
Black plate (469,1)
北米Model "A1250BE-B" EDITED: 2016/ 1/ 12
dealer for purchase of a standard
bumper beam if you do not have
the original.
. Safety performance is decreased
and there is increased risk of
injury to passengers in the case
of an accident if the trailer hitch
or a standard bumper beam is
not installed. One of them must
always be installed on the vehi-
cle.
. If a trailer hitch is installed, it is
not possible to install the rear
towing hook.
The maximum gross trailer weight and
maximum gross tongue weight are indi-
cated in the following table.
Maximum
gross trailer
weight
Maximum
gross ton-
gue weight
Crosstrek models
1,500 lbs
(680 kg)
200 lbs
(90 kg)
When towing a trailer, refer to “Trailer
towing (Crosstrek models)” F8-18.
& Connecting a trailer
1) Ball mount
2) Hitch pin
3) Safety pin
A) Hitch receiver tube
1. Insert the ball mount into the hitch
receiver tube.
2. Insert the hitch pi n into t he hole
located on the hitch receiver tube so that
the pin passes through the ball mount.
3. Insert the safety pin through the hole
located on the hitch pin securely.
4. Check the ball mount assembly by
pulling on it to make sure it does not come
off the hitch receiver.
1) Hitch ball installation point
2) Hooks for safety chains
5. Attach a hitch ball. Use only a hitch
ball that is appropriate for the ball mount
and your trailer. The hitch ball must be
securely installed on the ball mount.
6. Connect your trailer to the hitch ball.
7. Connect the trailer and the hitch with
safety chains that will hold the trailer’s
Driving tips/Trailer hitch (Crosstrek models — dealer option)
– CONTINUED –
8-17
8
Loading ...
Loading ...
Loading ...