Loading ...
Loading ...
Loading ...
© Pro-Ject Audio Systems · Pro-Ject VT-E BT L · Revision 2018.04.26
8
3.
CARTRIDGE, VERTICAL TRACKING FORCE (VTF)
The turntable is supplied with fitted cartridge Ortofon OM 5E. The counterweight (7) supplied is
suitable only for Ortofon OM cartridges. Cartridge downforce is pre-adjusted from the factory.
Please note: It is not recommended to change the cartridge or vertical tracking force without
prior consultation with your dealer.
4.
CONNECTION TO THE AMPLIFIER
The record player has two possible outputs – Line OUT (14) with integrated preamplifier and Phono OUT
(15) for connection to the preamplifier. If you choose Phono OUT (15), than use the Phono input
(sometimes labelled gram, disc or RIAA) on your amplifier. Make sure that the phono input offers
correct matching and amplification for the type of cartridge used. If you choose Line OUT (14), than
use the Line inputs (like CD, Tuner, Tape or Video).
Take care about connecting the left and right channel correctly. The RIGHT CHANNEL is usually
marked RED, the LEFT CHANNEL BLACK or WHITE. Check the manual of your amplifier for relevant
information. An earthing wire may be connected to the screw terminal between the sockets if you
encounter humming problems.
For detailed product information regarding Pro-Ject Audio Systems interconnect cables, phono
amplifiers and stereo power amplifiers, please visit our website: www.project-audio.com
5.
BLUETOOTH PAIRING
The record player has Bluetooth output and transmit signal automatically when is turned on by using
Bluetooth switch (17).
It is paired automatically with any device with Bluetooth receiver (such as Pro-Ject MaiA, MaiA DS,
Bluetooth Box s and Bluetooth Box E).
For pairing with other devices and portable speakers use the manual of the given product.
For restart of the Bluetooth transmitter, please turn OFF and ON the Bluetooth module by using the
switch. Restart is needed only when there is a change of the Bluetooth receiver.
For detailed product information regarding Pro-Ject Audio Systems Bluetooth audio receivers, please
visit our website: www.project-audio.com
6.
MAINS POWER CONNECTION
The turntable is supplied with a power supply suitable for your country's mains supply. Check the label
before connecting to ensure compliance with the mains rating in your house.
Connect the low voltage plug from the power supply to the socket (19) on the rear of the record
player before
connecting the power supply to the mains.
7.
SWITCHING ON AND OFF
Loading ...
Loading ...
Loading ...