Sony STR-DA3400ES Operating Instructions

Loading ...

108

D:\Cannes\STR-DA3400ES_U_R1\3289137121\3289137121\3289137121\01US-

STRDA3400ESUC\090OTH.fm

masterpage: Left

STR-DA3400ES

3-289-137-12(1)

To set up the speakers

Set “Sur Back Assign” to “BI-AMP” in the

Speaker settings menu. The same signals

output from the SPEAKERS FRONT A

terminals can be output from the SPEAKERS

SURROUND BACK terminals by setting “Sur

Back Assign” to “BI-AMP”.

Notes

• You cannot use the SPEAKERS FRONT B

terminals for a bi-amplifier connection.

• Set “Sur Back Assign” to “BI-AMP” before you

perform Auto Calibration.

• If you set “Sur Back Assign” to “BI-AMP”, the

speaker level, balance, and equalizer settings of the

surround back speakers become invalid, and those

of the front speakers are used.

• Signals output from the PRE OUT jacks are used

with the same settings as those of the SPEAKERS

terminals.

• If you set “Speaker Pattern” to a setting with

surround back speakers, you cannot set “Sur Back

Assign” to “BI-AMP”.

Operating without

connecting to the TV

You can operate this receiver using the display

window if you do not use a GUI when a TV is

not connected.

Press GUI MODE to display “GUI

OFF” in the display window.

When “GUI MODE” is displayed in the

display window, the menu is set to display on

the TV screen using a GUI.

1 Press AMP.

2 Press MENU.

3 Press V/v repeatedly to select

the menu you want.

Navigating through menus on

the display window

Sony STR-DA3400ES 7.1 Channel ES Receiver