Loading ...
Loading ...
Loading ...
11
BOSCH
Trouble shooting
Problem Probable cause Solution
The iron does not
heat up.
The “SensorSteam” function
has been activated. The iron
is set to stand-by.
Grip the handle of the iron to
re-start it.
Water drips out of
the soleplate when
using the “shot of
steam” function.
You have pressed the shot
of steam button (6)
repeatedly without waiting
for 5 seconds between each
press.
Wait 5 seconds between each
press of the shot of steam
button.
Steam does not
come out in
horizontal position.
Dry ironing steam mode has
been selected.
Set the steam control to “eco”
or “max” position.
Excessive dripping
or steaming.
No proper closing of “clean”
but ton (11).
Point the iron away from the
ironing area. Actuate a few
times the “clean” button.
The motor does not
work.
The iron is not in a
horizontal position.
Use the iron in a horizontal
position.
Smoke comes out
when connecting the
iron for the rst time.
This may be caused by the
lubrication of some of the
internal parts.
This is normal and will stop
after a few minutes.
Deposits come out
through the holes in
the soleplate (10).
Traces of lime scale are
coming out of the steam
chamber.
Carry out a cleaning cycle (see
“Calc'n Clean function”
section).
The appliance
makes a pumping
sound.
Water is being pumped into
the steam chamber.
This is normal.
If none of the above solves the problem, get in touch with
an Authorised Technical Service.
Guarantee conditions
The terms of the guarantee for this appliance are in
accordance with that stated by our representative for the
country in which it is sold.
The details of these conditions can be obtained from
the retailer from whom the appliance was purchased.
The purchase receipt must be presented when making
any claims against the terms of this guarantee.
Loading ...