Loading ...
Loading ...
Loading ...
Black plate (300,1)
北米Model "A3170BE-A" EDITED: 2011/ 7/ 12
8-16 Driving tips
1) 12 in (300 mm)
4. Install the front crossbar so that the
crossbar end supports are located ap-
proximately 12 in (300 mm) rearward from
the joints between the roof rails and the
front roof rail supports.
1) Lower clamp
2) T-30 torx
®
head screw
5. Tighten the lo wer clamps onto the
crossbar. Using a torque wrench, loosely
tighten the T-30 torx
®
head screws.
NOTE
It may be necessary to squeeze the
lower clamp and the end support
together to compress the pads and
gain a better alignment of the pieces
while trying to start the screw. Use care
not to cross-thread the screw in the
insert.
6. Adjust the alignment of the crossbar
on the roof rails, and if available, use a T-
30 torx
®
bit and torque wrench and tighten
the T-30 torx
®
head screws to 30 to 35
lbf·in (3.4 to 4.0 N·m, 0.35 to 0.41 kgf·m) of
torque (or tighten securely with the torx
®
wrench provided).
Loading ...
Loading ...
Loading ...