Loading ...
Loading ...
Loading ...
8
EMERGENCY DISCONNECT SYSTEM
ADJUSTMENT
NO EC
I
T
To prevent possible SERIOUS INJURY or DEATH from a falling
door or arm:
• DO NOT stand under the door arm when pulling the
emergency release.
• If possible, use emergency release handle to disengage trolley
ONLY when door is CLOSED. Weak or broken springs or
unbalanced door could result in an open door falling rapidly
and/or unexpectedly.
• NEVER use emergency release handle unless doorway is clear
of persons and obstructions.
ATTENTION
AVERTISSEMENT AVERTISSEMENT
AVERTISSEMENT
WARNINGWARNING
CAUTION
WARNING
WARNING
PRECAUCIÓN
ADVERTENCIA
ADVERTENCIAADVERTENCIA
Header
Bracket
Trolley
Track
Chain
Clevis Pin
Emergency
Disconnect
Straight
Door Arm
Assembly
Door
Bracket
Curved
Door Arm
Door
Emergency
Release Handle
Emergency
Disconnect
Emergency
Disconnect
Door Arm
Door Arm
Pull emergency release
handle straight down.
Emergency disconnect
will open.
Lift free end of door arm
to trolley. Pull emergency
handle to allow arm to
engage roll pin. Release
handle. Emergency
disconnect will close.
TO DISCONNECT DOOR FROM OPERATOR
The door should be in the fully closed position if possible. Pull
down on the emergency release handle (so that the trololey
release arm snaps into a vertical position) and lift the door
manually. The lockout feature prevents tthe troley from
reconnecting automatically, andd the door can be raised and
loweredd manually as often as necessary.
TO RECONNECT DOOR ARM TO TROLLEY
Pull the emergency release handle toward the operator at an
angle so that the trolley release arm is horizontal. The trolley will
reconnect on the next UP or DOWN operation, either manually or
by using the door control or remote.
Loading ...
Loading ...
Loading ...