Loading ...
Loading ...
Loading ...
29
UBP-X800 / UBP-UX80
4-687-309-11(1)
master page=right
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\070ADD.fm
Additional Information
• Delete pairing information once from the
device list and connected device, before
retrying connection.
• Connection may not be possible if other
Bluetooth devices are present around the
player. In this case, turn off the other
Bluetooth devices.
• The connection registration information has
been erased. Perform the connection
operation again.
There is no sound, the sound skips or
fluctuates, or the connection is lost.
• DVD AUDIO cannot be played via Bluetooth
device due to DRM.
• Move the Bluetooth device closer to the
player.
• Make sure the player is not receiving any
interference from a Wi-Fi network, other
Bluetooth device, other 2.4 GHz wireless
device, or microwave oven.
• Check that the Bluetooth connection is
properly made between the player and the
Bluetooth device.
• Connect the player and the Bluetooth
device again.
• Keep the player away from metal objects or
surfaces.
The [Control for HDMI] function does not
work (BRAVIA Sync).
• Check that your TV is connected via the
HDMI OUT 1 jack.
• Check that [Control for HDMI] in [HDMI
Settings] is set to [On] (page 24).
• If you change the HDMI connection, turn the
player off and on again.
• If power failure occurs, set [Control for
HDMI] in [HDMI Settings] to [Off], then set
[Control for HDMI] in [HDMI Settings] to [On]
(page 24).
• Check the following and refer to the
instruction manual supplied with the
component.
– the connected component is
compatible with the [Control for HDMI]
function.
– the connected component’s setting for
the [Control for HDMI] function is
correct.
• When you connect the player to a TV
through an AV amplifier (receiver),
– if the AV amplifier (receiver) is not
compatible with the [Control for HDMI]
function, you may be unable to control
the TV from the player.
– if you change the HDMI connection,
disconnect and reconnect the AC
power cord, or a power failure occurs,
try the following:
1Switch the input
selector of the AV amplifier (receiver)
so that the picture from the player
appears on the TV screen.
2Set
[Control for HDMI] in [HDMI Settings] to
[Off], then set [Control for HDMI] in
[HDMI Settings] to [On] (page 24). Refer
to the instruction manual supplied with
the AV amplifier (receiver).
The System Power-Off function does not
work (BRAVIA Sync).
• Check that [Control for HDMI] and [Linked to
TV-off] in [HDMI Settings] are set to [On] and
[Valid] (page 24).
Playback does not start from the beginning
of content.
• Press OPTIONS, and select [Play from
beginning].
Playback does not start from the resume
point where you last stopped playing.
• The resume point may be cleared from
memory depending on the disc when
– you open the disc tray.
– you disconnect the USB device.
– you play other content.
– you turn off the player.
Message Code 1 [Playback stopped. The
content being played is protected by
Cinavia and is not authorized for playback
on this device. For more information, see
http://www.cinavia.com. Message Code 1]
appears on the screen when playing a disc.
• The audio track of the video that you are
playing contains a Cinavia code indicating it
was intended for presentation using
professional equipment only and is not
authorized for playback by consumers
(page 36).
Control for HDMI (BRAVIA Sync)
Others
Loading ...
Loading ...
Loading ...