Loading ...
Loading ...
Loading ...
TRX2500 Treadmill
5
TRX2500
Assembly Pack Checklist
Cut the banding straps with a short box cutter (razor knife); separate the carton from the one under-
neath it by prying up on the staples (if applicable). Pull the carton over the treadmill parts and locate
the hardware pack. The hardware pack is separated into ve sections; one section containing tools
and four sections labeled steps 1-4 which contain the hardware needed for assembly of each step.
The assembly steps below are numbered one through four and correspond to the hardware in the
numbered sections of the hardware pack. Remove only the hardware for the step you are currently
assembling to avoid confusion and mix ups.
Pull the carton over the treadmill parts and lay it on a level surface.
ASSEMBLY PACK CHECKLIST
# 102. Combination M5 Allen Wrench &
Phillips Head Screw Driver (1pc)
# 103. M6_
L Allen Wrench (1pc)
#99. 5/16" × 1/2"_
Hex Head Bolt (8pcs)
# 90. 13L_Wrench (1pc)
# 80. Ø8 × 1.5T_
Split Washer (4pcs)
#100. Ø5/16" × Ø18 × 1.5T_
Flat Washer (8pcs)
#125. 5/16" × 3/4"_
BoltHex Head Bolt (8pcs)
Loading ...
Loading ...
Loading ...