Loading ...
Loading ...
page | 3
© 2017 SunBrite™
INTRODUCTION
We appreciate your purchase and are committed to providing the highest-quality
products possible.
The SunBrite™ Outdoor Sound bar models are a superb choice for almost every
type of home theater or home audio installation. They have been designed with
advanced technological components that allow for high performance and a
lifetime of enjoyment.
IMPORTANT INSTRUCTIONS AND CONSIDERATIONS
Read and understand all instructions. Before beginning installation, carefully plan
location accounting for potential electrical, plumbing or other obstacles.
RECOMMENDED AMPLIFIER POWER
To get the best performance from the Sound bar when used with a Veranda Series
SunBriteTV
®
, an amplifier or receiver with a power rating between 20 and 90 Watts
RMS per channel is recommended: The Signature and Pro Series SunBriteTVs have
an internal amplifier that can be used to drive the soundbar.
SPEAKER WIRE
To connect the Sound bar to an AV Receiver or Amplifier, high-quality 14 to 16
gauge stranded speaker wire is recommended. The wire may be connected
directly to the speaker’s binding posts. Remember that you will need 2 runs of
speaker wire to the Sound bar location as it contains the left and right speaker.
Use the included DIN cable to connect the soundbar to a SunBriteTV. See page 5
for more information.
CONTENTS
SB-AW-SNDBR-S-B
• (1)DIN cable w/90 cm cable for compatible SunBriteTVs
• (1) Speaker Mount Bracket Small
• (4) 1/4-20 x .25” Screws
• (4) 1/4-20 Flat Washers
SB-AW-SNDBR-M-B
• (1)DIN cable w/90 cm cable for compatible SunBriteTVs
• (1) Speaker Mount Bracket Large
• (2) 1/2” threaded standoff
• (2) 7/8” threaded standoff
• (4) 1/4-20 x .25” Screws
• (4) 1/4-20 Flat Washers
Loading ...
Loading ...
Loading ...