CHARGING YOUR MOBILE
BATTERY
Fully charge your mobile battery before using it for
the rst time. This will take about 3.25 hours.
1 Plug the small end of the USB cable into the
mobile battery’s micro USB port (input).
2 Plug the large end of the included USB cable into
a standard USB port on your computer, car
charger, or wall charger (not included). The
mobile battery automatically begins charging and
the red LED turns on.
Note: The blue LED lights when the mobile battery is fully
charged.
CHARGING YOUR ELECTRONIC
DEVICE
1 Plug the large end of the USB cable into the mobile
battery’s USB port (output).
2 Plug the small end of USB cable into your device.
The mobile battery automatically begins charging
your device.
Notes:
• If your device requires a dierent connector than the one
provided, use the cable that came with your device
• Recharge the mobile battery when the red LED starts
blinking.
• The LEDs will turn o when the electronic device is fully
charged.
FEATURES
LEDS
V1 ENGLISH 15-0523
SPECIFICATIONS
LEGAL NOTICES
FCC Statement:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and
receiver.
— Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician
for help.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
FCC Caution
Changes or modications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
ICES Statement
CAN ICES-3 (B)/NMB-3 (B)
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and
Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies.
Distributed by Best Buy Purchasing, LLC
©2015 Best Buy. All rights reserved.
Made in China
Quick Setup Guide
|
NS-MB2601 / NS-MB2601-C / NS-MB2602 / NS-MB2602-C /
NS-MB2603 / NS-MB2603-C / NS-MB2604 / NS-MB2604 -C
Mobile Battery Pack
Before using your new product, please read these
instructions to prevent any damage.
PACKAGE CONTENTS
• Mobile battery pack
• Micro USB charging and sync cable
• Quick Setup Guide
SAFETY INFORMATION/CAUTION
• Do not expose your mobile battery to heat, re, or water.
• Do not modify, disassemble, open, drop, crush, puncture,
or shred the internal battery.
• This is not a toy. Young children should be supervised to
make sure that they do not play with the mobile battery.
• Do not charge electronic devices while the mobile battery
is recharging.
• Recharge the mobile battery before use if it has not been
used for more than 90 days.
• Risk of res and burns. Do not open, crush, heat above
140°F (60°C), or incinerate. Follow the manufacturer’s
instructions.
• Operation environment temperatures: 32~104°F (0~40°C)
This product is safe for regular use under normal conditions.
As with any device using electrical power, some situations
may be unsafe and injuries or damages could result. To
minimize or avoid unsafe conditions, read and follow the
instructions before using.
OUT 5V/1A
IN 5V/1A
LEDs
Micro USB
(input)
USB (output)
Input
Output
Capacity
5V, 1A
5V, 1A
2600 mAh
Blue LED on
Red LED on
Red LED ashes
Both LEDs o
Mobile battery fully charged
OR
Electronic device is charging
Mobile battery is charging
Mobile battery level low
*Recharge the mobile battery
Mobile battery not connected
OR
Electronic device is fully charged.
OR
Mobile battery has no charge
Loading ...
