Loading ...
Loading ...
Loading ...
3
Safety and warnings
electrical hazards, injury, and damage to your appliance and
loss of warranty. Failure by the installer to install the screws or
fixing devices in accordance with these installation instructions
may result in electrical hazards. Please install the appliance as
detailed in these instructions.
■■
There must be adequate ventilation of the room when the
rangehood is used at the same time as appliances burning gas or
other fuels. (A partial vacuum in the room could result in too high
a concentration of gas in the air).
■■
You must read the details concerning the method and frequency
of cleaning.
■■
There is a fire risk if cleaning is not carried out in accordance with
the instructions.
■■
Do not flambé under the rangehood.
■■
Exhaust air must not be discharged into an existing flue that
is used for exhausting fumes from appliances burning gas or
otherfuels.
■■
The minimum distance between the cooktop surface and the
filters of the rangehood shall be 600 mm, or 650 mm if installed
over a gas cooktop.
■■
Attention should be given to ensure that any applicable
regulations concerning the discharge of exhaust air is fulfilled.
■■
If the supply cord of this equipment is damaged it must only
be replaced by the manufacturer, its service agent or similarly
qualified person in order to avoid a hazard.
■■
Always switch the power off prior to installation, servicing or
cleaning the rangehood.
■■
Never use the rangehood without the filters in place.
■■
Stainless steel or powdercoat is very easily damaged during
installation if abraded or knocked by tools. It is recommended to
protect the top of the rangehood with cardboard or plastic bag
during the installation to minimise the risk of damage occurring.
■■
A power outlet should be within 750 mm of the motor assembly
and can be either on the wall, behind the chimney or in the ceiling.
Loading ...
Loading ...
Loading ...