Loading ...
Loading ...
Loading ...
Hints
Because of the long life of these bulbs, the
likelihood of failure is very low. Switching the
lights on and off frequently shortens their life.
If a bulb fails, reel on the front fog lights and
continue the trip with great care. Comply with
local regulations.
Do not perform work/bulb replacement
on xenon headlights
Have any work on the xenon lighting system,
including bulb replacement, performed only by
a service center. Due to the high voltage
present in the system, there is a danger of fatal
injuries if work is carried out improperly.◀
For checking and adjusting headlamp aim,
please contact your BMW center.
Light-emitting diodes (LEDs)
Follow general instructions, refer to page 230.
With Xenon-headlights, the following lights are
designed with LED technology:
▷ Parking lights and roadside parking lights.
▷ Turn signals, incl. side indicators
▷ Daytime running lights
Contact your service center in the event of a
malfunction.
Turning lamp with the Xenon headlight
Follow general instructions, refer to page 230.
The illustration shows the left side of the en‐
gine compartment.
55-watt bulb, H7.
1. Open the folding cover in the engine com‐
partment.
2. Turn the lid and remove it.
3. Pull the connector off the bulb.
4. Squeeze the wire bracket together and de‐
tach.
5. Remove the bulb and replace it.
6. Insert the new bulb and attach the cover in
the reverse order.
Seite 232
Mobility Replacing components
232
Online Edition for Part no. 01 40 2 954 177 - II/15
Loading ...
Loading ...
Loading ...