Loading ...
Loading ...
Loading ...
2 Set the temperature control (12) to the
“max” position and plug in the iron.
3 After the necessary warm-up period, the
pilot
light
(13) goes out. Then, unplug the
iron (very important!).
4 Set steam regulator to the “max” position.
5 Hold the iron over a sink. Press the
“clean” button (10) and shake the iron
until approximately one third of the water
capacity of the tank is evaporated.
Boiling water and steam will come out,
carrying scale or deposits that might be
there.
6 Release the “clean” button, and gently
shake the iron for some seconds.
7 Repeat the steps 5 and 6 three times
until the tank is empty.
x 3
15
B O S C H
* Model dependent
Loading ...
Loading ...
Loading ...