Loading ...
Solar Powered Animal Repeller
Locating the repeller:
When installing your repeller, choose a location that needs protection and also
receives good sunlight. For best results, the repeller should receive at least 8
hours of sunlight. This repeller is designed for long term use, allowing you to
place it and leave it to repel pests. It is weather proof allowing it to work all year
around. The repeller can be hung or inserted into the ground using the ground
stake provided. To use the ground stake, simply insert the flat end into the
bottom of the repeller. WARNING: ALWAYS CHECK FOR UNDERGROUND
UTILITIES, CABLES OR WIRES BEFORE DIGGING OR INSTALLING.
FAILURE TO CHECK COULD RESULT IN PERSONAL INJURY, PROPERTY
DAMAGE OR EVEN DEATH. After checking for underground utilities, prepare
the ground for the stake by digging or pile driving a hole suitable for the repeller.
Do not hit or strike the repeller unit or stake to drive it into the ground – this will
damage the unit and void any warranty. Make sure the ground stake is firmly in
the ground and not loose.
Using the repeller:
To operate, open the back cover using a Phillips head screwdriver and refer to the
diagram below. Remove the tab / plastic barrier from the rechargeable batteries to
allow contact. Normally, the repeller will be in standby mode. Only when
motion is detected (range of 30’ and arc of 110 degrees) will the repeller activate.
There are 3 operating models described below. Before first use, please allow two
full days of sunlight to charge the batteries while the repeller is in the “OFF”
position.
Loading ...