Loading ...
Loading ...
Loading ...
9
BEFORE OPERATING
Before operating the appliance, read and under-
stand this operation manual completely.
Before the appliance can be used, follow these
steps:
1. Place the drip tray correctly. See page 8.
2. Plug in the appliance. A beep will sound and
the display will show “Toast”.*
3. Fill the water tank with cold, ltered tap
water and install. Check that an audible
signal sounds and the red LED lights blinks.
4. Follow directions below to clean the oven
before rst use.
* Default mode is “Toast”. Once you use the
appliance, it will show the cooking mode you
set last.
You may detect smoke or a burning smell when
using the appliance for the rst time, this is
normal and not a sign that the appliance is out
of order. To avoid this problem, when rst using
the oven, operate the appliance without food for
20 minutes.
PREPARATION
1. Ventilate the room.
2. Install the drip tray.
3. Fill the water tank with cold, ltered tap
water and install.
4. Make sure nothing is in the appliance.
CLEAN THE OVEN BEFORE FIRST USE
TO CLEAN THE OVEN BEFORE USE,
FOLLOW THESE STEPS.
1. Turn the dial until Bake/Reheat appears in
the display.
2. Press SELECT.
3. Turn the dial to set the temperature (485°F).
4. Press SELECT.
5. Turn the dial to set the heating time
(20 M).
6. Press START.
The oven door, outer cabinet, oven cavity and
especially the heating elements will become hot.
Loading ...
Loading ...
Loading ...