Loading ...
Loading ...
Loading ...
Before using for the first time
22
Water hardness
The display changes to the screen for
setting the water hardness.
– The dishwasher must be pro-
grammed to the correct water hard-
ness for your area.
– Your local water authority will be able
to advise you of the water hardness
level in your area.
– Where the water hardness fluctuates
e.g. between 10 - 16 gr/gal (10 - 15
°d), always program the dishwasher
to the higher value (16 gr/gal or 15 °d
in this example).
It is useful to know your water hardness
so that you can provide the service
technician with this information in the
event of any service calls.
Enter the water hardness below:
____________ gr/gal (°d)
The dishwasher is programmed at the
factory for a water hardness level of 1
gr/gal (1 °d).
Use the arrow buttons to select
the hardness of your water supply
and confirm with OK.
See “Settings menu, Water hardness”
for more information.
The message Set-up successfully com-
pleted will then appear in the display.
After confirming this with OK, the
prompts Refill salt and Refill rinse aid
may appear.
Add salt and rinse aid if necessary
(see “Before using for the first time,
Dishwasher salt” and “Rinse aid”).
Confirm the messages with OK.
The program selected will appear briefly
in the display and the appropriate indi-
cator light will come on.
Then, the display will show the esti-
mated program duration for the pro-
gram selected.
These basic settings will be saved after
the dishwasher has been through one
complete program.
Loading ...
Loading ...
Loading ...