Loading ...
REPLACING THE FUSE
If your fan stops working, you may need to replace the fuse.
Warning: Risk of re. Replace only with a 5 Amp, 125 Volt fuse.
1 Unplug your fan.
2 Slide the fuse cover towards the blades until you can see the entire fuse.
3 Carefully pry out the old fuse.
4 Push the new fuse into the compartment, then slide the fuse cover closed.
Your fan is ready for normal use.
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA
For customer service, call 1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
USING YOUR FAN
1 Set your fan on a dry and level surface.
2 Plug in the fan.
3 Adjust the fan to the angle that you want.
4 Turn the control knob to ON. Slide the switch to
the speed you want.
CLEANING/MAINTENANCE
INSTRUCTIONS
• Turn o and unplug the fan.
• Carefully wipe the fan with a soft, damp cloth. Be very cautious near the
motor.
• DO NOT immerse the fan in water and never allow water to drip into the
motor housing.
• Never use gasoline, benzene, or thinner to clean the fan. This will damage
the surface of the fan.
• After cleaning, be sure to completely dry the fan with a cloth or towel
before using it.
• Before putting the fan in storage, clean it thoroughly, cover it with a vinyl
bag, and store it in a cool and dry place. We recommend using the original
(or appropriately sized) box.
INSIGNIA is a trademark of Best Buy and its aliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
W7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2014 Best Buy. All rights reserved.
Made in China
V1 ENGLISH 14-1216
OPEN
CLOSE