Loading ...
Loading ...
Loading ...
10
CARE AND MAINTENANCE
CAUTION: Failure to unplug the unit could result in electrical shock or personal injury.
Cleaning the Freezer
1. Unplug the freezer and remove the contents and drawers.
2. Wash the inside surfaces with a solution of warm water and baking soda. The solution should
contain about 2 tablespoons of baking soda to a quart of water.
3. Wash the drawers with a mild detergent solution.
4. Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry
with a clean soft cloth.
5. Wring excess water out of the sponge or cloth before cleaning the area of the temperature
control or any electrical parts.
Power Failure
Most power failures are corrected within a few hours and should not affect the temperature of your
freezer if you minimize the number of times the door is opened. If the power is going to be off for a
longer period of time, you need to take the proper steps to protect the contents.
Vacation Time
During long absences, remove all the contents. Unplug the freezer, clean it and leave the door open
slightly to avoid possible formation of condensation, mold or odors.
Moving the Freezer
1. Remove all the contents.
2. Securely tape down all loose items inside the unit.
3. Turn the leveling legs up to the base to avoid damage.
4. Tape the door shut.
5. Be sure the freezer stays secure in the upright position during transportation.
Locking the Freezer
To lock or unlock the freezer, you must hold the key in the lock while turning. The lock is spring
loaded, so the key cannot be left in the lock.
If the key is lost, contact your dealer or SUMMIT APPLIANCE for a replacement. Always give the
model and serial number of your appliance when requesting a replacement key. Keys for most
models can be ordered online at www.summitappliance.com/support.
Energy-Saving Tips
•
The freezer should be located in the coolest area of the room, away from heat-producing
appliances or heating ducts and out of direct sunlight.
•
Let warm items cool to room temperature before placing in the freezer. Over-loading the unit
forces the compressor to run longer. Items that freeze too slowly may lose quality or spoil.
•
Be sure stored items are properly wrapped. Wipe containers dry before placing them in the
freezer. This cuts down on frost build-up inside the unit.
•
Freezer storage drawers should not be lined with aluminum foil, wax paper or paper toweling.
Liners interfere with cold air circulation, making the freezer less efficient.
•
Organize and label contents to reduce door openings and extended searches. Remove as many
items as needed at one time, and close the door as soon as possible.
Loading ...
Loading ...