Loading ...
Loading ...
Loading ...
34
FEATURES AND CONTROLS
Passenger Seat
Always make sure the passenger
seat is installed and securely
latched before operating with a
passenger. Test the seat latch by
attempting to pull the seat
upward. If the lock-out is not
working properly, do not allow a
passenger to ride the vehicle.
See your Polaris dealer for service.
To remove the seat, pull the latch loop at the rear of the seat. Pull the
seat upward to remove it from the vehicle.
To reinstall the seat, make sure the rubber feet at the base of the seat are
positioned in the rear rack. Press down firmly on the seat pad until the
latch clicks.
Fuel Filter
Some models are equipped with an in-line fuel filter. If your model is
equipped, the filter is located under the rubber service cover inside the
front box. Have your dealer replace the filter after every 200 hours of
operation and any time the fuel becomes contaminated with dirt or
debris. Do not attempt to clean the fuel filter.
Fuel Tank
Remove the fuel tank cap to add
fuel to the fuel tank. Use either
leaded or unleaded gasoline with
a minimum pump octane number
of 87=(R+ M/2) octane. Do not
use E-85 fuel.
Latch
Fuel
Ta n k
Cap
Loading ...
Loading ...
Loading ...