Loading ...
Loading ...
Loading ...
- 14 -
2. CONNECT ELECTRICAL:
• Power Supply Connection:
For connection to the power supply refer
to the following Fig.12:
1. Remove the power supply cover by
undoing the (2) screws Fig.12A.
2. Break through the hole on the box
cover.
3. Secure the power supply conduit to
the cover.
4. Connect the wires of the hood to tho-
se of the power supply as described
Fig.12B:
BLACK = L line
WHITE = N neutral
GREEN / YELLOW = G ground
- A double-pole switch properly rated
must be installed to provide the range
hood power supply disconnection.
- Connect the electrical conduit to the
Field Wiring Compartment using listed
conduit ttings.
Fig.12 Fig.13
Fig.12
Loading ...
Loading ...
Loading ...