Loading ...
Loading ...
Loading ...
en Time-setting options
18
Removing the rotisserie spit
:Warning – Risk of burns!
Never touch the hot surfaces of the cooking
compartment or the heating elements. Children must be
kept at a safe distance from the appliance at all times.
Open the appliance door carefully. Hot steam may
escape.
:Warning – Risk of burns!
Never directly touch the rotisserie spit or other
accessories when they are hot. Always use a pot holder
or wear oven gloves to handle accessories when they
are hot.
1. Open the appliance door carefully.
2. Pull the rotisserie spit rack with the metal frame to
the left and out of the motor adaptor.
3. Pull the rotisserie spit rack out of the oven as far as
possible.
4. Hold the rotisserie spit on the right-hand side with a
pot holder and screw the grill onto the rotisserie spit.
5. Carefully lift the rotisserie spit off the rotisserie spit
rack.
6. Remove the rotary spit rack and the baking tray from
the oven.
OTime-setting options
Ti me- set t i ng opt i ons
Setting the clock
Once the appliance has been connected to the mains
or after a power cut, "12:00" will flash in the display. The
current time must be set in order for the oven to be
switched on.
1. Press the "+" and "-" buttons at the same time. The
settings can be configured once the Ú symbol starts
flashing in the display.
2. Use the "+" and "-" buttons to set the current time.
If the buttons are not pressed for a long time, the
symbols will stop flashing and the display will show the
set time.
Note: This clock acts solely as a timer. An alert will
sound once the set time has elapsed – the oven will not
be switched off.
Button lock
The digital timer has an automatic button lock. If the
timer is inactive for at least 10 seconds, the button lock
is activated automatically. The ó symbol will be shown
on the display while the button lock is active.To disable
the button lock, press and hold the "+" and "-" buttons at
the same time for 2 seconds.
Setting the timer
The timer has no effect on how the oven works. The
timer can be set between 1 minute and 23 hours and
59 minutes.
1. Press and hold the "+" and "-" buttons at the same
time for 2 seconds to disable the button lock.
2. Press the "+" button. The V symbol will flash in the
display.
3. Use the "+" and "-" buttons to set the required time. If
the buttons are not pressed for a long time, the
symbols will stop flashing and the display will show
the current time.
4. An audible signal will sound once the time has
elapsed.
Switching off the audible signal
Press the "+" or "-" button to switch off the timer.
Note: While the timer is active, the display will show the
current time.
Changing the audible signal
Pressing and holding the "-" button for 5 seconds while
the timer is showing the current time will make the clock
issue a warning signal. The clock has three different
audible signals. A different signal will sound each time
the "-" button is pressed. The last signal you selected is
saved as the default tone.
Loading ...
Loading ...
Loading ...