Loading ...
Loading ...
Loading ...
12 PowerXL Cordless Iron & Steamer Deluxe | Model: ES2416S_05
Care & Cleaning
Cleaning
NOTE: Before cleaning the PowerXL Cordless Iron
& Steamer Deluxe in any way, make sure that it is
unplugged from the electrical supply. Remove the
Power Cable from the outlet.
1. Place the iron in the vertical position and allow
to cool. This will enable any residual water to
dry. Be certain the appliance is thoroughly
cooled before cleaning.
2. Clean the Soleplate and the body of the iron
using a lightly damp, moist cloth. Do not
use abrasive scourers or brushes to clean any
part of the iron.
3. Follow the Self-Cleaning instructions.
Self-Cleaning
The Self-Cleaning feature cleans inside the plate,
removing impurities. We recommend using it every
10–15 days.
1. Fill the tank up to the Maximum Level
and set the Steam Selector (#4, p. 6) to the "off"
position.
2. Place the iron vertically in the base.
3. Turn the Temperature Control Dial (#7, p. 6) to
the Max position.
4. Plug the iron into the power outlet and allow it
to heat for 2 minutes.
5. Unplug the iron, remove from the base, and
hold it horizontally over a sink or basin.
6. Press the Self-Cleaning Button (#9, p. 6)
repeatedly for around 1 minute to activate
the cleaning function. This will release both
steam and water through the soleplate to clear
any deposits. Repeat the above steps again if
needed, particulary in hard water areas.
CAUTION: When using the Self-Clean function,
hot water and steam will rush through the
soleplate.
4. After completing the Self-Cleaning cycle, turn
the iron on again and allow to heat for two
minutes to dry out any residual water inside the
steam chamber.
5. If any synthetic bers fuse to the soleplate, set
the iron to MAX and pass it over a clean piece of
cotton to draw the deposits off the surface.
6. When the soleplate has cooled down, you
can clean it with a damp cloth. Then, allow the
iron to heat fully and activate the steam setting,
ironing on a discardable cloth to get any
remaining impurities that may have settled
around the steam vents.
Storage
1. Unplug the appliance and let it cool down
thoroughly.
2. Empty the tank by turning the iron upside down
and gently shaking it.
3. Lock the iron back into the base.
4. Wind the power cord around
the base. Do not overpull the
cord as this may weaken
the power cable and plug.
5. Always put the iron away in
a vertical position.
Loading ...
Loading ...
Loading ...