Loading ...
Loading ...
Loading ...
Automatic Switch Off times
Heat setting
- - - -
Stops after
6 hours 5 hours 4 hours 1.5 hours
The heat setting
Touch the control bar at the necessary heat
setting. Change to the left or the right, if it
is necessary. Do not release before you have
a correct heat setting. The display shows the
heat setting.
/ Switching the outer rings on and off
You can match the effective heating surface to the size of the cookware.
To switch on the outer ring touch the sensor field
/ . The indicator comes on. For
more outer rings touch the same sensor field again. The next indicator comes on.
Do the procedure again to switch off the outer ring. The indicator goes out.
Automatic Heat Up
1
2
3
4
5
6
7
8
9
10
11
12
0
1234567891011121314
You can get a necessary heat setting in a shorter time if you activate the Automatic Heat
Up function. This function sets the highest heat setting for some time (see the graphic),
and then decreases to the necessary heat setting.
To start the Automatic Heat Up function for a cooking zone:
1. Touch
( comes on in the display).
2. Immediately touch the necessary heat setting. After 3 seconds
comes on in the
display.
To stop the function change the heat setting.
A
8
Operating instructions
Loading ...
Loading ...
Loading ...