Loading ...
Loading ...
Loading ...
4. Attach the pump Handle to the Pump Body by
lining up the screw holes and securing a Large
Screw.
5. Now attach the Pump Body to the Small Panel
with the final two Large Screws and attach the
Small Panel to the top of the Small Bucket with
the last of the four Small Screws.
6. Next Install the Tubing into the fountain. The first
one will connect from the bottom of the Pump
Body to the bottom of the Small Bucket. The
Second Tube will connect under the bottom of the
Small Bucket to the actual Pump.
2x
7. Gently pour water into the fountain basin, being
careful not to overflow and cause splashing. Make
sure the water completely submerges the pump
and the water runs clear during operation.
NOTE: We recommend that you use distilled water
to prevent scale build-up. The first time you operate the
pump it can take up to 5 minutes for the air to be
completely expelled and water begins to flow properly
6
7
Loading ...
Loading ...