Loading ...
Loading ...
Loading ...
Installation
46
Adjusting the minimum setting for natural
or town gas
Light the burner and turn it to the minimum
position. Remove the knob from the gas
cock and turn the adjustment screw next to
the gas cock spindle (depending on the
model) until the correct minimum flame is
obtained. Replace the knob and check that
the burner flame is stable.
Turn the knob rapidly from the maximum to
the minimum setting: The flame should not
go out. Repeat the operation on all gas
cocks.
Adjusting the minimum setting for LPG
Tighten the screw located at the side of the
cock spindle clockwise all the way.
Lubricating the gas cocks
Over time the gas cocks may become
difficult to turn and get blocked. Clean them
internally and replace the lubrication
grease.
Following adjustment to a gas
other than the one originally set in
the factory, replace the gas setting
label on the appliance with the
one corresponding to the new gas.
The label is inserted inside the
nozzle pack (where present).
Lubrication of the gas cocks should
be performed by a specialised
technician.
Loading ...
Loading ...
Loading ...