Loading ...
Loading ...
Loading ...
12
Cybex 18020 Bravo Pull Owner’s Manual
If Then
18020cannott
through
doorway
Two people will be required for this procedure
1. Remove the four shipping cones using a 3/4” socket or wrench.
2. Attach foot pads to each foot of frame
3. Remove back panels from machine.
4. Verify weight stack pin is disengaged.
5. Remove spiral pin connecting pulley using a hammer and a 3/16” pin
punch.
Spiral
pin
6. Move pulley and cable connections out of the way.
7. Remove guide rod caps. Guide rod cap contains a compression spring
that will y if grasp is not released slowly. Slide spring loaded guide rod
cap down guide rod until cap is clear of frame. Slowly release grasp of
guide rod cap and remove.
Loading ...
Loading ...
Loading ...