Loading ...
Loading ...
Loading ...
ENGLISH
GB
GENERAL
1.1 Carefully read the contents of this leaet since it provides
important instructions regarding safety of installation, use and
maintenance.
Keep the leaflet for possible future consultation. All the
operations relating to installation/replacement (electrical
connections) must be carried out by specialised personnel
in conformity with the regulations in force.
SAFETY WARNINGS
2.1 It is recommended to use at-bottom pans with a diameter
equal to or slightly larger than that of the heated area. Do not
use pans with a rough base to prevent scratching the heat
surface of the cooktop (Fig.2).
This appliance is not suitable for use by children or persons
requiring supervision. Do not let children play with the
appliance.
2.2 Important:
- Avoid spilling liquid, therefore to boil or heat liquids, reduce
the heat.
- Do not leave the heating elements on with empty pots and
pans or without receptacles.
- When you have nished cooking, switch o the relevant
heating element with the control indicated below.
2.3 Attention:
- Steam cleaners must not be used.
- If the surface is cracked, switch off the appliance to
prevent electric shock.
- This appliance is not intended for use by young children
or inrm persons without supervision.
- Young children should be supervised to ensure they do
not play with the appliance.
- The appliance is not intended to be operated by means
of external timer or separated remote-control system.
2.4 Questo apparecchio è contrassegnato in conformità alla
Direttiva Europea 2002/96/EC, Waste Electrical and Electronic
Equipment (WEEE). Assicurandosi che questo prodotto sia
smaltito in modo corretto, l’utente contribuisce a prevenire
le potenziali conseguenze negative per l’ambiente e la salute.
Il simbolo sul prodotto o sulla documentazione di
accompagnamento indica che questo prodotto non deve
essere trattato come riuto domestico ma deve essere
consegnato presso l’idoneo punto di raccolta per il riciclaggio
di apparecchiature elettriche ed elettroniche. Disfarsene
seguendo le normative locali per lo smaltimento dei riuti.
Per ulteriori informazioni sul trattamento, recupero e
riciclaggio di questo prodotto, contattare l’idoneo ucio
locale, il servizio di raccolta dei riuti domestici o il negozio
presso il quale il prodotto è stato acquistato.
INSTALLATION INSTRUCTIONS
3.1 These instructions address specialised installers and serve
as a guide for installation, adjustment and maintenance in
conformity with the laws and regulations in force. If a built-
in oven or any other appliance that generates heat must
be fitted directly under the glass-ceramic cooktop, THIS
APPLIANCE (oven) AND THE GLASS-CERAMIC COOKTOP MUST
BE SUITABLY INSULATED in such a way that the heat generated
by the oven, measured on the bottom right of the cooktop,
does not exceed 60°C. Failure to respect this precaution may
determine improper functioning of the TOUCHCONTROL
system.
3.2 Positioning (Fig.1):
The domestic appliance is designed to be built into a worktop
as illustrated in the specic gure. Apply sealant around
the entire perimeter (cut-out dimensions Fig.1B). Fix the
domestic appliance on the worktop by means of the 4 brackets
provided, taking the thickness of the worktop into account
(Fig.1A). If the lower part of the appliance, after installation, is
accessible via the lower part of the cabinet then it is necessary
to mount a separator panel respecting the distances indicated
(Fig.1C). If the appliance is installed with an oven underneath
then the separator is not necessary.
3.3 Electrical connections:
Before making the electrical connections, check that:
- the ground cable is 2 cm longer than the other cables;
- the system ratings meet the ratings indicated on the
identication plate xed on the lower part of the worktop;
- the system is tted with ecient earthing compliant to the
laws and regulations in force.
If the appliance is not tted with a cable, use type:
“H05V2V2-F” for a power level of up to 6400 Watts. The cross-
section of the cable should be at least 2.5 mm², or 4 mm² for
greater power levels.
The cable should never reach a temperature which is 50°C
above the temperature of the room in which it is installed.
The appliance is designed for permanent connection to
the electricity supply and should therefore be tted with
an omnipolar switch which has a minimum opening of 3
mm between contacts. The switch should be suitable for
the charge indicated on the appliance data plate and must
conform to all current legislation (the yellow/green earth wire
must not be interrupted by the switch).
The omnipolar switch must be easy to reach once the
installation process has been completed.
USE AND MAINTENANCE
4.1 Maintenance (Fig.3):
Remove any residues of food and drops of grease from the
cooking surface using the special scraper supplied on request.
Clean the heated area as thoroughly as possible using SIDOL,
STAHLFIX or similar products and a cloth/paper, then rinse
with water and dry with a clean cloth. Using the special scraper
(optional) immediately remove any fragments of aluminium
and plastic material that have unintentionally melted on
the heated cooking area or residues of sugar or food with a
high sugar content. In this way, any damage to the cooktop
surface is prevented. Under no circumstances use abrasive
sponges or irritating chemical detergents such as oven sprays
or stain removers.
4.2 Use:
Use the touch control system in the corresponding position
relative to the individual cooking needs.
Keep in mind that the higher the number, the more heat that
it is produced.
- 6 -
Loading ...
Loading ...
Loading ...